RAC-920

Standalone Access Controller

Mai multe detalii

Features

Slim, stylish design, waterproof sensitive touch keypad with backlight.
Waterproof and bell key design. Suit for various location.
(IP65 certificate)Support network or standalone operation.
Provide RS-485 communication, able expandable to 64 sets by RS-485 interface.
Memory capacity 1024 cardholders / 3000 events.
Support swipe card and card with pin codes enter modes and door relay time from 1~600 seconds.
Casing tamper proof detection and door tamper alarm.
Programmable door sensor detection time from 1~600 seconds and able set relay or reader beep of alarm type.
Duress card/code setting. When door opened in the emergency, controller will send signal to control center at the same time for tracing and rescue.
Conditional Unlock Door function, able open 1~9999 seconds per time.
Unique ID or Block read format supported and programmable key value.(RAC-920PM)
Watchdog function secures system free from halting.

Specification

Processor	8 Bit
Memroy	32K
Input Ports	3 Sensors (Door Sensor x 1 Exit Button x 1 Case Sensor x 1)
Output Ports	Relay x 1 (Electronic Lock),O.C. Output x 2 (Electronic Lock/Alarm/Door Bell, external ACU-30)
Cardholders / Events	1,024 / 800
LED Indicator	Power
LCD Display	-
Keypad	*13 Key (0-9, , #, Bell) (Sensitive Touch Keypad)**
Real Time Clock	Yes
Beep Tone	Buzzer
ID Setting	DIP switch setting
Reader Format & Range	EM(125KHz) 8~10CM (RAC-920PE) (max.) MIFARE^® / MIFARE^® DESFire(13.56MHz) 3~5CM (RAC-920PM)(max.)
Power Input	DC 12V / 1A
Current Consumption	250mA (max.)
Comm. Interface	RS-485
Comm. Baud Rate	19,200 bps-N-8-1
Operating Temp.	-10C°~ 55C° / 14C°~ 131C°
Relative Humidity	20% ~ 80% (Non-condensing)
Dimension	120mm(L) x 77mm(W) x 22mm(H)
Weight (Device)	140g